H06-2 Epoxy ester primer

Key Features

export5@colourway.com

Get Free Samples

Product Detail

Product description:

The cyclohexyl epoxy primer is formulated by first modifying the epoxy resin with fatty acids from vegetable oils, then grinding it together with rust-inhibiting pigments such as red iron oxide and zinc yellow, as well as extender pigments. Subsequently, additives and solvents are incorporated to obtain the final product. This product is an anti-moth primer that air-dries, forming a hard, durable film with excellent adhesion. Main products: H06-2 epoxy primer with red iron oxide and zinc yellow.

Use:

The iron-red epoxy primer is suitable for coating black metal surfaces, while the yellow-zinc epoxy primer is suitable for coating light metals. It is ideal for priming metal surfaces in coastal areas and tropical climates. The corresponding topcoats include alkyd, amino, polyurethane, nitrocellulose, and acrylic coatings.

Operating temperature:

Under dry conditions, the maximum operating temperature is 120°C.

Coating data

Colors: Iron red, Zinc yellow, Others

Finish: Matte

Package quantity: 20 kg packaged in a 18.5-liter drum.

Solid content: ≥70%

Solvent content: 300 grams per liter; specific density of the mixture approximately 1.3 kilograms per liter.

Drying time (20~25°C): Surface dry ≤ 1 hour; Fully dry ≤ 48 hours; Oven-dry

(120 ± 2°C) 1 hour

Flash point: 25°C

Storage

Storage conditions: Store in a dry, cool place, away from sources of light and heat.

Shelf life: Not less than 12 months at 25°C. Products that have exceeded their shelf life may still be used if they pass inspection.

Construction data:

Coating methods: airless spraying, air spraying, brush application, roller application

Complementary product series: See the company’s product catalog for coatings with alkyd, amino-polyurethane, and nitro finishes.

Surface treatment requirements:

1. Metal surfaces that are being painted for the first time must be cleaned to remove contaminants such as oil, inorganic salts, and dust from the surface. Identification and treatment procedures can be carried out according to ISO 8504:1992.

2. For surfaces coated with old paint, first remove contaminants such as oil stains, dust, and moisture, and then proceed with repair work. The assessment and treatment can be carried out according to ISO 8504:1992.

3. Treat areas with flaking and damage to meet the specified standards (e.g., Sa2.5 ISO 8501-1:1988).

Other statements:

1. This product must be used at the place of production by professional coating operators, following the instructions provided in the instruction manual and on the packaging. Any work involving the application and use of this product must comply with the health, safety, and environmental protection standards and regulations of each country. If you have any questions about how to use this product, please contact the Industrial Protection Department of Suzhou Jialewei Enterprise Development Co., Ltd. for further details.

2. The company shall not be liable for any accidents caused by the use of our products in combination with products from other companies without the prior consent of the Industrial Safety Department of Suzhou Jiale Ban Enterprise Development Co., Ltd.

3. If this product is to be used for purposes other than those explicitly specified in this manual, you must obtain prior approval from our company.

Construction precautions:

1. Before use, stir the paint thoroughly and dilute it with a thinner to achieve the viscosity suitable for your application.

2. If a thicker paint film is required, apply it in several layers, ensuring that each layer has a dry film thickness of 20 μm, equivalent to a wet film thickness of 30 μm. Wait until the previous layer has completely dried before applying the next layer.

3. Any leftover paint can be slightly diluted with a small amount of thinner; then, the surface should be covered and the bucket lid sealed tightly to prevent film formation.

4. The construction site must have good ventilation, and the use of open flames is strictly prohibited.

Prev: Antioxidant alkyd paint

Next: H06-18 Multicolor epoxy primer for oxidized surfaces

Inquire Now

Company

Phone

+86